LTXXX
Underwater oil hose with one end reinforced buoy ring
Main carcass Main liner/inner tube: Smooth, oil, fuel resistant pure seamless and extruded acrylonitrile-butadiene-rubber (NBR); safety liner
Casing: Smooth black synthetic rubber, abrasion, oil, sea water and sunlight resistant synthetic rubber.
Fittings: End connections built in during manufacturing. ASME B 16.5 150 lb or 300 lb weld neck flat or raised face as required.
Testing: All tests as per GMPHOM 2009 and customer details.
Standards and Specifications: Zebang single carcass hoses are designed and produced in full compliance with OCIMF standards. These products are also subject to ISO 9000
Rated working pressure: The RWP of the oil pipe is at least 15 bar. 19 bar and 21 bar hoses are also available if specified by the customer. They are suitable for operation at internal pressures from minus 0.85 bar to RWP.
Flow rate: The lining of the Zebon subsea hose is made of elastomer and fabric, suitable for continuous operation at a flow rate of 21m/s.
Application: Submarine hose is suitable for use with crude oil and liquid petroleum products from -20℃ to 82℃, and aromatic hydrocarbon content not greater than 50% by volume.
Electrical continuity: Copper wire and spiral wire will provide a low resistance connection.
| Standard data of oil hose with float ring with standard 15BAR-19BAR rated pressure |
| Nominal Inner Diameter(mm) | Weight in air (kg) | Outer diameter(mm)
| Minimum bending radius |
| 9.1m | 10.7m | 12.2m | A | B |
| 150(6") | 382/144 | 419/161 | 456/178 | 368 | 254 | 0.6(2.0') |
| 200(8") | 485/218 | 541/243 | 596/268 | 471 | 311 | 0.8(2.8) |
| 250(10") | 575/286 | 756/315 | 837/344 | 471 | 368 | 1.0(3.3) |
| 300(12") | 893/327 | 1003/372 | 1013/417 | 581 | 471 | 1.2(4.0) |
| 400(16") | 1808/659 | 2028/726 | 2248/793 | 697 | 581 | 1.6(5.3') |
| 500(20") | 2412/928 | 2694/1019 | 2976/1110 | 799 | 697 | 2.0(6.6') |
| 600(24") | 3369/1367 | 3775/1572 | 4181/1659 | 946 | 799 | 2.4(8.0') |
Note: The actual parameters are subject to the latest atlas
Welcome to LETONE
From 2003, Letone has always been committed to manufacturing rubber hose for 14 years, which provides high-grade and high-end rubber hose for the field of spaceflight and maritime industry, petroleum industry and highway, and PLA etc. Just as careful and elaborate rubber hose, LETONE has now become a high-tech enterprise integrating research, production, sales and services after years of steady development, shining brilliantly in the international market as an iconic enterprise among China's rubber hose.
More about LETONE
80,000 m2 of Production Bases
By 2016, Letone has built 4 world-class manufacture bases which cover a total area of over 80,000 m2, and accomplished an annual production value of RMB 5 billion.
More about Production Strength
Globalization & Localization
To offer you more timely service and solve your puzzles during operation of production lines, we push out the strategy of "Globalization & Localization". Currently, we have set 4 overseas offices distributed over different continents. If there is any need, we can "knock your door" at once. It is a strategy just right for you.
Searching Overseas Offices
What Do We Do?
From the clear service list, you can accurately know about which services Letone will providefor you…
More about Businesses
Service You Can Rely On
Service is the soul of a brand. So, LETONE integrates service into each segment of the life cycle of every order from pre-sale, in-sale until after-sale, and offers "consultancy" and "manager" service.
|
|
Underwater oil hose with one end reinforced buoy ring Transport crude oil and liquid petroleum products between loading Images
|
